KULT X MICRA ENTHUSIASTS

Application & Removal Guide

Applying Your Sticker

1. Clean the surface – Wash and dry the area thoroughly. Remove any wax, grease, or polish residue. [Placeholder: confirm recommended cleaning product, e.g. isopropyl alcohol wipe]
2. Surface temperature – Apply only when the surface is between [Placeholder: e.g. 10–35 °C / 50–95 °F]. Avoid applying in direct sunlight or on a very cold panel.
3. Position first – Use the backing paper to position the sticker before committing. Peel the backing slowly at a low angle.
4. Smooth it down – Use a card or squeegee, working from the centre outward to push out air bubbles.
5. Cure time – Allow [Placeholder: e.g. 24–48 hours] before washing the car or exposing the sticker to heavy moisture.

Car Wash & Aftercare

• [Placeholder: confirm whether touchless/hand wash only is required, or if automated car washes are safe]
• Avoid high-pressure jets aimed directly at sticker edges.
• [Placeholder: confirm any wax or polish restrictions over the sticker]

Removing Your Sticker

1. Heat the sticker – Use a heat gun or hair dryer set to [Placeholder: e.g. low–medium heat, approx. 40–60 °C / 100–140 °F] and warm the sticker for 20–30 seconds to soften the adhesive.
2. Peel slowly – Lift a corner and peel back at a low angle (15–30°), keeping the heat moving to stay ahead of the peel.
3. Adhesive residue – Any remaining residue can be removed with [Placeholder: confirm safe removal product, e.g. isopropyl alcohol or dedicated adhesive remover]. Always test on an inconspicuous area first.
4. Paint safety – [Placeholder: confirm any paint-safety or warranty notes you wish to include. Do not publish unverified claims.]

Have a question about fitting your KULT sticker? Contact us before applying.